 |
|
|
Valves and Fittings Vapor Recovery Strainers |
Nozzles and Accessories Dry Disconnect |
| Emergency
Valves for Tank Trucks—FIG 603 Air Actuated Series The Morrison Fig. 603 Air Actuated Tank Truck Emergency Valve is mounted on the underside of a tank on a petroleum tank truck or tanker. The internal BimbaŽ Pneumatic Cylinder is field replaceable. Currently the valve is available in a 3" Flanged or Victaulic Version, as well as a 4" Flanged Version. |
 |
| Emergency
Valves for Tank Trucks—FIG 603 Manual Series The Morrison 603 Emergency Valve is mounted on the underside of a petroleum tank truck or tanker. The seat is located internal to the tank helping ensure it will close preventing product loss in the event of a shear. The handle is equipped with a 250° fuse plate. All valves will be shipped with the handle on the right (when looking into the outlet) but may be easily changed to left-hand in the field. |
|
| Emergency
Valves for Tank Trucks—FIG 203 and 204 Series Traditional style truck tank emergency valves. Threaded (NPT) connections. Used for repair and variety of specialized system designs. |
 
  |
| Emergency
Valve Operator—FIG 507 Series Remote control of emergency valves through flexible cable. Maximum 3/16" cable. Replaceable fuse adaptor releases at 210°F. Threaded take-up for cable slack adjusts conveniently in place. Choice of 1 5/8" or 2 3/8" cable travel positions. Dual trip levers provide shut-off of emergency valves from two locations. |
  |
| Water
Drain Valve—FIG 372 Threaded/poppeted end fits up inside tank. Valve allows water to be drained from bottom of the tank. Brass body, Viton (R) o-ring, and stainless steel spring. |
 |
| Vapor
Recovery Caps and Adaptors—FIG 323/323C Used for Stage I Vapor Recovery. Adaptors are installed on the VR riser of UST with coupling connections to fit vapor recovery hose on truck. Various styles available. |
|
| Line
Strainers (Bottom Clean-out)—FIG 285 Series Y-type strainer used in pipelines to filter debris from flowing into and damaging equipment such as a pump or a meter. Strainer basket is removable for cleaning and/or replacement. Basket access is from the bottom. |
|
| 1
1/2" Manual Shutoff Nozzle—FIG 231 Series Manual shutoff nozzle used for liquid-petro-chemical handling such as fuel oil delivery, overwing aircraft refueling, and water distribution.Options are available to meet specific applications. |
|
| Aluminum
Hose Nozzle Swivel—FIG 124AL Installed at the nozzle inlet. For ease of operator handling and reduce hose wear. Disc and o-ring are Viton (R). Available in 1.25" and 1.5". 75 PSI working pressure. 150 PSI maximum. |
|
| Brass Hose Nozzle
Swivel—FIG 122BH Installed at the nozzle inlet. For ease of operator handling and reduce hose wear. All brass construction provides durability and smooth swivel action. Standard O-ring is Buna-N. Viton (R) is available. 50 PSI working pressure.100 PSI maximum. |
|
| Inlet Check Valve—FIG 229 Check valve mounted at the inlet of the nozzle. Used to retain residual product in the hose and help prevent spillage. |
|
| Brass Hose Nozzle
Swivel with Check—FIG 124 Installed at the nozzle inlet. For ease of operator handling and reduce hose wear. All brass construction provides durability and smooth swivel action with built-in check valve. |
|
| Dry Disconnect
Adaptor—FIG 926 Used to prevent product spill on a system where operation involves hook-up and disconnect. Bayonet style mount. compatible with other brands of bayonet style dry disconnects. Brass body, Buna-N seal. Viton(R) is available. |
|
|
To Purchase Morrison Equipment, Contact the Customer Service Department at 800.553.4840 |
|
*Viton(R) is a registered trademark of Dupont Dow Elastomers.
 |
