Tank Monitor Caps & Adaptors
-
Gauge Stick Port Cap & Adaptor
Product SKU: FIG 305GSPThe 305GSP provides an access port for manual gauging of aboveground storage tanks.
-
Tank Monitoring Cap - 2 inch
Product SKU: 305XPTank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
-
Tank Monitoring Cap/Adaptor Combination - 2 inch
Product SKU: 305XPATank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
-
Threaded Style Fill Cap - Gauge Stick Port
Product SKU: FIG 178GSPDesigned to identify and secure a tank opening dedicated to gauging the product with a gauge stick. The adaptor permanently threads onto a riser pipe or pipe nipple and the cap threads onto adaptor.
-
Tank Monitoring Cap - 4 inch
Product SKU: FIG 305XPTank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
Available with a 3/ 8 " or 1/2" threaded (NPT) hole for cable connector. 3/ 8 " or 1/2" cable connector is available with cap.
-
Tank Monitoring Cap/Adaptor Combination - 4 inch
Product SKU: FIG 305XPATank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
-
Probe Cap and Adaptor
Product SKU: FIG 307PDesigned for tank monitoring applications when a male threaded riser is provided and a thread on style cap is required.
-
Extractor Pipe Cap
Product SKU: FIG 578Used as a cover for the extractor/float vent valve riser pipe. Installed at grade level, normally inside a manhole.
-
EVR Approved Tank Monitor Caps/Adaptors
Product SKU: FIG 305EVRUsed for fill ports and access to leak detection on fuel storage tanks. Profile machined for cam and groove fit on industry standard tight seal caps.
Top seal adaptor. Fits a standard top seal cap and drop tube.
EVR Approved.
Brass sand castings machined to the appropriate profile.