Adjustable Level Sensor924, 924S
Adjustable float activated simple switch device; used to monitor liquid level at a desired set point.
Four sensor length ranges
Fully adjustable within the sensor range length
Installs into a 2” female threaded opening
½” NPT fitting at top of sensor
Normally open switch easily converted to normally closed operation
Wires... PTFE jacketed wires
Floats... 316 stainless steel
Tube... brass (924); 304 stainless steel (924S)
Bushing... e-coated steel (924); 304 stainless steel (924S)
100 watt resistive load, 300VAC - 700mA max / 350VDC - 1.0A max, SPST
*Switch ratings are for resistive loads only.
*Do not use for inductive loads.
*Compatible with 918S/D/Q Alarm Box and 918AC System Interface or similar listed systems that are designed for use with sensing devices located in a hazardous location.
Approved Use Locations
UL/ULC Class I, Div 1, Group D (when used in conjunction with the model 918AC, model 918S/D/Q, and model 918SB)
National Work Group on Leak Detection Evaluations list (www.nwglde.org); Florida DEP EQ-862
|924||0600 AS||6"||Brass adjustable level sensor|
|924||1200 AS||12"||Brass adjustable level sensor|
|924||2000 AS||20"||Brass adjustable level sensor|
|924||3000 AS||30"||Brass adjustable level sensor|
|924S||0600 AS||6"||Stainless steel adjustable level sensor|
|924S||1200 AS||12"||Stainless steel adjustable level sensor|
|924S||2000 AS||20"||Stainless steel adjustable level sensor|
|924S||3000 AS||30"||Stainless steel adjustable level sensor|
|925||0113 2B||Conduit junction housing (NEMA 4)|
|925||0114 2B||Conduit junction housing (NEMA 7, Group C & D)|