Check Valves
-
Double Poppet Vertical Check Valve
Product SKU: FIG 335BUsed as prime holding check valves typically in suctions systems. Designed for use in vertical piping systems.
-
In-Line Check Valve (1.5" and 2")
Product SKU: FIG 958In-line check valves are used to prevent backflow in supply lines on storage tank systems. In-line check valves allow product flow in only one direction.
-
In-Line Check Valve (1/2", 3/4", and 1")
Product SKU: FIG 958, 958BIn-line check valves are used to prevent backflow in supply lines on storage tank systems. In-line check valves allow product flow in only one direction.
-
Angle Check Valve
Product SKU: FIG 137Single poppet one way check valve used to prevent backflow in supply lines or used as a prime holding valve in suction system.
-
Back Pressure Valve - Angle Type
Product SKU: FIG 137BSingle poppet one way check valve used to maintain product flow in one direction.
-
Suction Pipe Strainer
Product SKU: FIG 157Suction strainers are designed to be installed at the inlet of a suction line normally installed at the bottom of the storage tank. Screen prevents debris from entering the line.
*See 334LP for smaller sizes.
-
Vertical Check Valve - Single Poppet/Spring Loaded
Product SKU: FIG 158ASingle poppet one way check valve used to prevent backflow in supply lines or used as a prime holding valve in suction systems.
NOTE: Opening pressure settings are approximate.
-
Swing Check Valve - Threaded, Brass
Product SKU: FIG 246ADesigned for to prevent backflow in horizontal piping systems. Swing check valves allow liquid to flow in a single direction.
-
Swing Check Valve - Threaded, Ductile Iron
Product SKU: FIG 246ADIDesigned to prevent backflow in horizontal piping systems. Swing check valves allow liquid to flow in a single direction.
-
Swing Check Valve - Flanged, Ductile Iron
Product SKU: FIG 246DRFDesigned to prevent backflow in horizontal piping systems. Swing check valves allow liquid to flow in a single direction.
-
Union Check Valve
Product SKU: FIG 331Union check valves install inside pipe unions where space is limited and a check valve is desired.
-
Union Check Valve with Screen
Product SKU: FIG 331SUnion check valves install inside pipe unions where space is limited and a check valve is desired.
-
Raised Face Companion Flange - 150 lbs
Product SKU: FIG 514Companion flanges convert male threaded pipe connections to flanged connections.
-
Nipple Check Valve for General Use
Product SKU: FIG 529One way check valve used to prevent backflow.NOTE: 529 is not intended for use with leak detection systems due to range of pressure relief. -
Nipple Check Valve for Leak Detection
Product SKU: FIG 530One way check valve used to prevent backflow.
