
Overfill Prevention Valve - X Series
FIG 9095XThe 9095X is a top-fill overfill prevention valve designed to prevent overfilling storage tanks by providing a positive shut-off during a pressurized fill.
*For use on clean liquids only.
Click HERE for animation video.
Standard Features
Fill adaptor and shut-off mechanism are factory-assembled for ease of field installation
Straight female threaded adaptor facilitates valve installation to a precise set point
Minimum shut-off height is 1” from the tank top
Full flow to shut-off point, cushioned closure eliminates shock
Drop tube adaptor accepts 2” drop fill tubes (Morrison 419)
Integral pressure relief
Integral anti-siphon function
305C--2000 cap included with 1100 and 2200 models
Mechanical Test Mechanism
Verify the operation of the valve by activating the test mechanism at any time during the filling process
Available on all models
Construction Details
- Direct fill adaptor is passivated aluminum
- Remote fill adaptor is powder coated ductile iron & stainless steel
- Shaft, linkage and hardware are stainless steel
- Lower pipe nipple is e-coated steel
- Body is passivated aluminum
- Drop tube adaptor is passivated aluminum
Operational Criteria
Minimum 5 PSI flow requirements
Maximum operating pressure is 100 PSI
Maximum viscosity of 300 centistokes
A tight fill connection is required for the valve to operate
The estimated flow rate is 230 GPM at 10 PSI pressure drop
Code Compliance
ULC-S661-10 listed, NFPA 30, 30A, UFC, IFC, PEI/RP 200, PEI/RP 600, Florida DEP EQ-858, and California EVR models available
Figure | Suffix | Size | Tank Opening | Drop Tube | Application | |||
9095X |
1100 AV | 2" | 4" | No | Generator base tanks with integrated spill container, Direct Fill | |||
9095X |
6100 AV | 2" | 4" | No | Generator base tanks with integrated spill container, Remote Fill | |||
9095X |
2200 AV | 2" | 4" | Yes | Low profile tanks; integrated spill container, Direct Fill | |||
9095X |
6200AVEVR | 2" | 4" | Yes | Valve with female threaded top connection, Remote Fill, EVR approved | |||
9095X |
2800 AV | 2" | 4" | Yes | General purpose and aviation, Direct Fill | |||
9095X |
6800AVEVR | 2" | 4" | Yes | General purpose and aviation, Remote Fill, EVR approved | |||
9095ATM |
1000 AK | Mechanical test mechanism kit for 9095X |
- FIG 9095X Specification Sheet
- 9095 Series Selection Guide
- 9095 Series Brochure
- FIG 9095X Installation Instructions (Models 1100 & 6100)
- FIG 9095X Installation Instructions (Models 2200 & 6200)
- FIG 9095X Installation Instructions (Models 2800 & 6800)
- 9095X Overfill Prevention Valve Selection Guide
- Spill Containment & Corresponding Overfill Prevention Valves